반응형

guidance 38

[US, FDA] Clinical Decision Support Software Frequently Asked Questions (FAQs)

Clinical Decision Support (CDS) software are important tools in modern health care. While some CDS software has been excluded from the definition of a medical device by the 21st Century Cures Act (Cures Act), many software functions continue to meet the definition of a medical device and are the focus of the Food and Drug Administration’s (FDA) regulatory oversight. Because a wide variety of sof..

미국 FDA 2024.12.24

[EU] MDCG 2024-15 - Guidance on the publication of the clinical investigation reports and their summaries in the absence of EUDAMED (November 2024)

1. Introduction Article 77(5) MDR requires that the sponsor submits to the Member States in which a clinical investigation was conducted a clinical investigation report within one year of the end of the clinical investigation or within three months of the early termination or temporary halt, irrespective of the outcome of the clinical investigation. Furthermore, the clinical investigation report..

유럽 MDR, IVDR 2024.12.18

[US, FDA] Transitional Enforcement Policy for Ethylene Oxide Sterilization Facility Changes for Class III Devices

FDA is issuing this guidance to communicate its policy regarding sterilization site changes for ethylene oxide (EtO) sterilized PMA and HDE devices in situations where those devices are affected by the potential, actual, or temporary operation reductions at sterilization facilities that may affect the availability of those sterile medical devices. FDA does not intend to object to sterilization o..

미국 FDA 2024.12.10

[EU] MDCG 2024-14 - Guidance on the implementation of the Master UDI-DI solution for contact lenses (November 2024)

Introduction and scope The introduction of the Unique Device Identification (UDI) system referred to in Article 27 of Regulation (EU) 2017/745 on medical devices (MDR) aims to ensure an adequate level of identification and traceability with respect to medical devices. Basic UDI-DIs, UDI-DIs and UDIPIs shall be assigned (in compliance with the rules of the designated issuing entities) by manufac..

유럽 MDR, IVDR 2024.12.05

[US, FDA] Orthopedic Non-Spinal Metallic Bone Screws and Washers - Performance Criteria for Safety and Performance Based Pathway

This guidance provides performance criteria for non-spinal metallic bone screws and their associated washers in support of the Safety and Performance Based Pathway. Under this framework, submitters planning to submit a 510(k) using the Safety and Performance Based Pathway for non-spinal metallic bone screws and washers will have the option to use the performance criteria proposed in this guidanc..

미국 FDA 2024.11.29

MDCG 2022-5 rev.1 - Guidance on borderline between medical devices and medicinal products under Regulation (EU) 2017/745 on medical devices - October 2024

1. BORDERLINE PRODUCTS: MEDICAL DEVICES / MEDICINAL PRODUCTS  1.1 IntroductionThe demarcation between the Regulation (EU) 2017/745 on medical devices (MDR) on the one hand and the Directive 2001/83/EC on the Community code relating to medicinal products for human use (MPD) on the other hand is crucial for the proper implementation of these sets of legislation and their correct interpretation and..

유럽 MDR, IVDR 2024.11.12

[EU] MDCG 2024-12 - Guidance and templates for conformity assessment bodies, notified bodies, designating authorities, and joint assessment teams

INTRODUCTION  This guidance document is intended for conformity assessment bodies (CABs), notified bodies (NBs), designating authorities (DAs), and Joint Assessment Teams (JATs) involved in Regulation (EU) 2017/745 on medical devices (hereafter MDR) and Regulation (EU) 2017/746 on in vitro diagnostic medical devices (hereafter IVDR). It should be read in conjunction with the guidance document MD..

유럽 MDR, IVDR 2024.10.22

[EU, IVD] MDCG 2024-11 - Guidance on qualification of in vitro diagnostic medical devices (October 2024)

Introduction The purpose of this guidance document is to clarify what products fall in scope of Regulation 2017/746 on in vitro diagnostic medical devices (IVDR) – also referred to as ‘qualification’ as an in vitro diagnostic medical device (IVD) or an accessory to an IVD. In order to be qualified as an IVD or an accessory to an IVD, the product must fulfil the definition in Art 2(2) or Art 2(4)..

유럽 MDR, IVDR 2024.10.21

[Emergo, UL] Post-market Surveillance Continues to Have Tremendous Interest

Background on post-market surveillance globallyPMS has been a pivotal topic. The European regulations (Medical Devices Regulation (2017/745, MDR) and In Vitro Diagnostic Devices Regulation (2017/746, IVDR)) officially defined the term PMS (Article 2(60)). In 2019, the U.S. FDA introduced the term Total Product Life Cycle (TPLC) as a "holistic” perspective with the FDA throughout the entire lifec..

뉴스 보고서 2024.10.18
반응형